first commit

.cwmrc

@@ -0,0 +1,43 @@
+#vim:ft=conf
+
+command term kitty
+
+## Tiling
+bind-key 4-H 	  window-htile
+bind-key 4-V	  window-vtile
+
+bind-key 4-d        "dmenu_run -fn \"JetBrains Mono:size=14\""
+bind-key 4-space        "dmenu_run -fn \"JetBrains Mono:size=14\""
+bind-key 4-f        window-fullscreen
+bind-key 4-Q        window-close
+bind-key 4-c        window-cycle
+bind-key 4-C        window-rcycle
+bind-key 4-h        window-hide
+
+bind-key 4-W        brave-browser
+bind-key 4-Return   terminal
+
+bind-key M-Up       "pactl set-sink-volume 0 +5%"
+bind-key M-Down     "pactl set-sink-volume 0 -5%"
+bind-key M-m        "pactl set-sink-mute 0 toggle"
+
+mousebind M-1       window_move
+mousebind CM-1      window_resize
+
+
+bind-key XF86AudioRaiseVolume "pactl set-sink-volume 0 +5%"
+bind-key XF86AudioLowerVolume "pactl set-sink-volume 0 -5%"
+bind-key XF86AudioMute "pactl set-sink-mute 0 toggle"
+
+bind-key XF86MonBrightnessUp "brightnessctl set 10%+"
+bind-key XF86MonBrightnessDown "brightnessctl set 10%-"
+
+sticky yes
+bind-key 4-1 group-only-1
+bind-key 4-2 group-only-2
+bind-key 4-3 group-only-3
+bind-key 4S-1 window-movetogroup-1
+bind-key 4S-2 window-movetogroup-2
+bind-key 4S-3 window-movetogroup-3
+
+gap 60 0 0 0

.xinitrc

@@ -0,0 +1,3 @@
+#vim:ft=sh
+setxkbmap -option caps:escape
+exec dbus-run-session "$HOME/cwm.sh"

.zshrc

@@ -0,0 +1,138 @@
+# If you come from bash you might have to change your $PATH.
+# export PATH=$HOME/bin:/usr/local/bin:$PATH
+
+# Path to your oh-my-zsh installation.
+export ZSH="$HOME/.oh-my-zsh"
+
+# Set name of the theme to load --- if set to "random", it will
+# load a random theme each time oh-my-zsh is loaded, in which case,
+# to know which specific one was loaded, run: echo $RANDOM_THEME
+# See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
+ZSH_THEME="robbyrussell"
+
+# Set list of themes to pick from when loading at random
+# Setting this variable when ZSH_THEME=random will cause zsh to load
+# a theme from this variable instead of looking in $ZSH/themes/
+# If set to an empty array, this variable will have no effect.
+# ZSH_THEME_RANDOM_CANDIDATES=( "robbyrussell" "agnoster" )
+
+# Uncomment the following line to use case-sensitive completion.
+# CASE_SENSITIVE="true"
+
+# Uncomment the following line to use hyphen-insensitive completion.
+# Case-sensitive completion must be off. _ and - will be interchangeable.
+# HYPHEN_INSENSITIVE="true"
+
+# Uncomment one of the following lines to change the auto-update behavior
+# zstyle ':omz:update' mode disabled  # disable automatic updates
+# zstyle ':omz:update' mode auto      # update automatically without asking
+# zstyle ':omz:update' mode reminder  # just remind me to update when it's time
+
+# Uncomment the following line to change how often to auto-update (in days).
+# zstyle ':omz:update' frequency 13
+
+# Uncomment the following line if pasting URLs and other text is messed up.
+# DISABLE_MAGIC_FUNCTIONS="true"
+
+# Uncomment the following line to disable colors in ls.
+# DISABLE_LS_COLORS="true"
+
+# Uncomment the following line to disable auto-setting terminal title.
+# DISABLE_AUTO_TITLE="true"
+
+# Uncomment the following line to enable command auto-correction.
+# ENABLE_CORRECTION="true"
+
+# Uncomment the following line to display red dots whilst waiting for completion.
+# You can also set it to another string to have that shown instead of the default red dots.
+# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
+# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
+# COMPLETION_WAITING_DOTS="true"
+
+# Uncomment the following line if you want to disable marking untracked files
+# under VCS as dirty. This makes repository status check for large repositories
+# much, much faster.
+# DISABLE_UNTRACKED_FILES_DIRTY="true"
+
+# Uncomment the following line if you want to change the command execution time
+# stamp shown in the history command output.
+# You can set one of the optional three formats:
+# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
+# or set a custom format using the strftime function format specifications,
+# see 'man strftime' for details.
+# HIST_STAMPS="mm/dd/yyyy"
+
+# Would you like to use another custom folder than $ZSH/custom?
+# ZSH_CUSTOM=/path/to/new-custom-folder
+
+# Which plugins would you like to load?
+# Standard plugins can be found in $ZSH/plugins/
+# Custom plugins may be added to $ZSH_CUSTOM/plugins/
+# Example format: plugins=(rails git textmate ruby lighthouse)
+# Add wisely, as too many plugins slow down shell startup.
+plugins=(git zsh-syntax-highlighting)
+
+source $ZSH/oh-my-zsh.sh
+
+# User configuration
+
+# export MANPATH="/usr/local/man:$MANPATH"
+
+# You may need to manually set your language environment
+# export LANG=en_US.UTF-8
+
+# Preferred editor for local and remote sessions
+# if [[ -n $SSH_CONNECTION ]]; then
+#   export EDITOR='vim'
+# else
+#   export EDITOR='mvim'
+# fi
+
+# Compilation flags
+# export ARCHFLAGS="-arch x86_64"
+
+# Set personal aliases, overriding those provided by oh-my-zsh libs,
+# plugins, and themes. Aliases can be placed here, though oh-my-zsh
+# users are encouraged to define aliases within the ZSH_CUSTOM folder.
+# For a full list of active aliases, run `alias`.
+#
+# Example aliases
+# alias zshconfig="mate ~/.zshrc"
+# alias ohmyzsh="mate ~/.oh-my-zsh"
+
+set -o vi
+alias gac='git add . && git commit'
+alias v='nvim'
+alias s='ls'
+#alias sy='systemctl'
+#alias j='journalctl'
+#alias r='source ranger'
+alias c='clear'
+alias e='exit'
+alias o='xdg-open'
+#alias ec='emacsclient'
+alias cp='cp -r'
+alias vc='nvim ~/.config/nvim/init.vim'
+
+
+# ~/.zshrc
+
+export MT_EDITOR=nvim
+export VISUAL=nvim
+pfetch
+
+alias caps='setxkbmap -option caps:escape'
+eval "$(starship init zsh)"
+
+alias r='source ranger'
+export PATH=/sbin:~/.local/bin:~/ohsg10/bin:$PATH
+
+test -f ~/ohsg10/env && source ~/ohsg10/env
+export EDITOR=nvim
+export PATH=~/cp:$PATH
+
+resetcursor() {
+  printf '\033]50;CursorShape=1\x7'
+}
+export PS1="$(resetcursor)$PS1"
+

LICENSE.md

@@ -0,0 +1,675 @@
+### GNU GENERAL PUBLIC LICENSE
+
+Version 3, 29 June 2007
+
+Copyright (C) 2007 Free Software Foundation, Inc.
+<https://fsf.org/>
+
+Everyone is permitted to copy and distribute verbatim copies of this
+license document, but changing it is not allowed.
+
+### Preamble
+
+The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works. By contrast,
+the GNU General Public License is intended to guarantee your freedom
+to share and change all versions of a program--to make sure it remains
+free software for all its users. We, the Free Software Foundation, use
+the GNU General Public License for most of our software; it applies
+also to any other work released this way by its authors. You can apply
+it to your programs, too.
+
+When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights. Therefore, you
+have certain responsibilities if you distribute copies of the
+software, or if you modify it: responsibilities to respect the freedom
+of others.
+
+For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received. You must make sure that they, too, receive
+or can get the source code. And you must show them these terms so they
+know their rights.
+
+Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software. For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the
+manufacturer can do so. This is fundamentally incompatible with the
+aim of protecting users' freedom to change the software. The
+systematic pattern of such abuse occurs in the area of products for
+individuals to use, which is precisely where it is most unacceptable.
+Therefore, we have designed this version of the GPL to prohibit the
+practice for those products. If such problems arise substantially in
+other domains, we stand ready to extend this provision to those
+domains in future versions of the GPL, as needed to protect the
+freedom of users.
+
+Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish
+to avoid the special danger that patents applied to a free program
+could make it effectively proprietary. To prevent this, the GPL
+assures that patents cannot be used to render the program non-free.
+
+The precise terms and conditions for copying, distribution and
+modification follow.
+
+### TERMS AND CONDITIONS
+
+#### 0. Definitions.
+
+"This License" refers to version 3 of the GNU General Public License.
+
+"Copyright" also means copyright-like laws that apply to other kinds
+of works, such as semiconductor masks.
+
+"The Program" refers to any copyrightable work licensed under this
+License. Each licensee is addressed as "you". "Licensees" and
+"recipients" may be individuals or organizations.
+
+To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of
+an exact copy. The resulting work is called a "modified version" of
+the earlier work or a work "based on" the earlier work.
+
+A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy. Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies. Mere interaction with a user
+through a computer network, with no transfer of a copy, is not
+conveying.
+
+An interactive user interface displays "Appropriate Legal Notices" to
+the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License. If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+#### 1. Source Code.
+
+The "source code" for a work means the preferred form of the work for
+making modifications to it. "Object code" means any non-source form of
+a work.
+
+A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form. A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities. However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work. For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+The Corresponding Source need not include anything that users can
+regenerate automatically from other parts of the Corresponding Source.
+
+The Corresponding Source for a work in source code form is that same
+work.
+
+#### 2. Basic Permissions.
+
+All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met. This License explicitly affirms your unlimited
+permission to run the unmodified Program. The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work. This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+You may make, run and propagate covered works that you do not convey,
+without conditions so long as your license otherwise remains in force.
+You may convey covered works to others for the sole purpose of having
+them make modifications exclusively for you, or provide you with
+facilities for running those works, provided that you comply with the
+terms of this License in conveying all material for which you do not
+control copyright. Those thus making or running the covered works for
+you must do so exclusively on your behalf, under your direction and
+control, on terms that prohibit them from making any copies of your
+copyrighted material outside their relationship with you.
+
+Conveying under any other circumstances is permitted solely under the
+conditions stated below. Sublicensing is not allowed; section 10 makes
+it unnecessary.
+
+#### 3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such
+circumvention is effected by exercising rights under this License with
+respect to the covered work, and you disclaim any intention to limit
+operation or modification of the work as a means of enforcing, against
+the work's users, your or third parties' legal rights to forbid
+circumvention of technological measures.
+
+#### 4. Conveying Verbatim Copies.
+
+You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+#### 5. Conveying Modified Source Versions.
+
+You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these
+conditions:
+
+-   a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+-   b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under
+    section 7. This requirement modifies the requirement in section 4
+    to "keep intact all notices".
+-   c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy. This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged. This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+-   d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit. Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+#### 6. Conveying Non-Source Forms.
+
+You may convey a covered work in object code form under the terms of
+sections 4 and 5, provided that you also convey the machine-readable
+Corresponding Source under the terms of this License, in one of these
+ways:
+
+-   a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+-   b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the Corresponding
+    Source from a network server at no charge.
+-   c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source. This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+-   d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge. You need not require recipients to copy the
+    Corresponding Source along with the object code. If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source. Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+-   e) Convey the object code using peer-to-peer transmission,
+    provided you inform other peers where the object code and
+    Corresponding Source of the work are being offered to the general
+    public at no charge under subsection 6d.
+
+A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal,
+family, or household purposes, or (2) anything designed or sold for
+incorporation into a dwelling. In determining whether a product is a
+consumer product, doubtful cases shall be resolved in favor of
+coverage. For a particular product received by a particular user,
+"normally used" refers to a typical or common use of that class of
+product, regardless of the status of the particular user or of the way
+in which the particular user actually uses, or expects or is expected
+to use, the product. A product is a consumer product regardless of
+whether the product has substantial commercial, industrial or
+non-consumer uses, unless such uses represent the only significant
+mode of use of the product.
+
+"Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to
+install and execute modified versions of a covered work in that User
+Product from a modified version of its Corresponding Source. The
+information must suffice to ensure that the continued functioning of
+the modified object code is in no case prevented or interfered with
+solely because modification has been made.
+
+If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information. But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or
+updates for a work that has been modified or installed by the
+recipient, or for the User Product in which it has been modified or
+installed. Access to a network may be denied when the modification
+itself materially and adversely affects the operation of the network
+or violates the rules and protocols for communication across the
+network.
+
+Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+#### 7. Additional Terms.
+
+"Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law. If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it. (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.) You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders
+of that material) supplement the terms of this License with terms:
+
+-   a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+-   b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+-   c) Prohibiting misrepresentation of the origin of that material,
+    or requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+-   d) Limiting the use for publicity purposes of names of licensors
+    or authors of the material; or
+-   e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+-   f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions
+    of it) with contractual assumptions of liability to the recipient,
+    for any liability that these contractual assumptions directly
+    impose on those licensors and authors.
+
+All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10. If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term. If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions; the
+above requirements apply either way.
+
+#### 8. Termination.
+
+You may not propagate or modify a covered work except as expressly
+provided under this License. Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+However, if you cease all violation of this License, then your license
+from a particular copyright holder is reinstated (a) provisionally,
+unless and until the copyright holder explicitly and finally
+terminates your license, and (b) permanently, if the copyright holder
+fails to notify you of the violation by some reasonable means prior to
+60 days after the cessation.
+
+Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License. If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+#### 9. Acceptance Not Required for Having Copies.
+
+You are not required to accept this License in order to receive or run
+a copy of the Program. Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance. However,
+nothing other than this License grants you permission to propagate or
+modify any covered work. These actions infringe copyright if you do
+not accept this License. Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+#### 10. Automatic Licensing of Downstream Recipients.
+
+Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License. You are not responsible
+for enforcing compliance by third parties with this License.
+
+An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations. If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License. For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+#### 11. Patents.
+
+A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based. The
+work thus licensed is called the contributor's "contributor version".
+
+A contributor's "essential patent claims" are all patent claims owned
+or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version. For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement). To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients. "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+A patent license is "discriminatory" if it does not include within the
+scope of its coverage, prohibits the exercise of, or is conditioned on
+the non-exercise of one or more of the rights that are specifically
+granted under this License. You may not convey a covered work if you
+are a party to an arrangement with a third party that is in the
+business of distributing software, under which you make payment to the
+third party based on the extent of your activity of conveying the
+work, and under which the third party grants, to any of the parties
+who would receive the covered work from you, a discriminatory patent
+license (a) in connection with copies of the covered work conveyed by
+you (or copies made from those copies), or (b) primarily for and in
+connection with specific products or compilations that contain the
+covered work, unless you entered into that arrangement, or that patent
+license was granted, prior to 28 March 2007.
+
+Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+#### 12. No Surrender of Others' Freedom.
+
+If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under
+this License and any other pertinent obligations, then as a
+consequence you may not convey it at all. For example, if you agree to
+terms that obligate you to collect a royalty for further conveying
+from those to whom you convey the Program, the only way you could
+satisfy both those terms and this License would be to refrain entirely
+from conveying the Program.
+
+#### 13. Use with the GNU Affero General Public License.
+
+Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work. The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+#### 14. Revised Versions of this License.
+
+The Free Software Foundation may publish revised and/or new versions
+of the GNU General Public License from time to time. Such new versions
+will be similar in spirit to the present version, but may differ in
+detail to address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies that a certain numbered version of the GNU General Public
+License "or any later version" applies to it, you have the option of
+following the terms and conditions either of that numbered version or
+of any later version published by the Free Software Foundation. If the
+Program does not specify a version number of the GNU General Public
+License, you may choose any version ever published by the Free
+Software Foundation.
+
+If the Program specifies that a proxy can decide which future versions
+of the GNU General Public License can be used, that proxy's public
+statement of acceptance of a version permanently authorizes you to
+choose that version for the Program.
+
+Later license versions may give you additional or different
+permissions. However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+#### 15. Disclaimer of Warranty.
+
+THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
+WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
+PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
+DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR
+CORRECTION.
+
+#### 16. Limitation of Liability.
+
+IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR
+CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
+ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT
+NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
+LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM
+TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
+PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+
+#### 17. Interpretation of Sections 15 and 16.
+
+If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+END OF TERMS AND CONDITIONS
+
+### How to Apply These Terms to Your New Programs
+
+If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these
+terms.
+
+To do so, attach the following notices to the program. It is safest to
+attach them to the start of each source file to most effectively state
+the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+        <one line to give the program's name and a brief idea of what it does.>
+        Copyright (C) <year>  <name of author>
+
+        This program is free software: you can redistribute it and/or modify
+        it under the terms of the GNU General Public License as published by
+        the Free Software Foundation, either version 3 of the License, or
+        (at your option) any later version.
+
+        This program is distributed in the hope that it will be useful,
+        but WITHOUT ANY WARRANTY; without even the implied warranty of
+        MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+        GNU General Public License for more details.
+
+        You should have received a copy of the GNU General Public License
+        along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper
+mail.
+
+If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+        <program>  Copyright (C) <year>  <name of author>
+        This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+        This is free software, and you are welcome to redistribute it
+        under certain conditions; type `show c' for details.
+
+The hypothetical commands \`show w' and \`show c' should show the
+appropriate parts of the General Public License. Of course, your
+program's commands might be different; for a GUI interface, you would
+use an "about box".
+
+You should also get your employer (if you work as a programmer) or
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. For more information on this, and how to apply and follow
+the GNU GPL, see <https://www.gnu.org/licenses/>.
+
+The GNU General Public License does not permit incorporating your
+program into proprietary programs. If your program is a subroutine
+library, you may consider it more useful to permit linking proprietary
+applications with the library. If this is what you want to do, use the
+GNU Lesser General Public License instead of this License. But first,
+please read <https://www.gnu.org/licenses/why-not-lgpl.html>.

README.md

@@ -0,0 +1,5 @@
+## Debian Rice
+
+Debian + Cwm Rice
+
+![Screenshot](./2022-04-01-225945_1920x1080_scrot.png)

cwm.sh

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+command -V nitrogen && nitrogen --restore &
+test -x ~/.config/polybar/launch.sh && ~/.config/polybar/launch.sh
+picom &
+
+eval "$(gnome-keyring-daemon --start)"
+export SSH_AUTH_SOCK
+
+openbsd-cwm

kitty/kitty.conf

@@ -0,0 +1,61 @@
+# vim:ft=conf
+
+font_family      JetBrains Mono
+font_size 11.5
+
+background_opacity         0.8
+dynamic_background_opacity yes
+
+window_margin_width 5
+bell_path none
+bell_on_tab no
+
+enable_audio_bell no
+
+background #3b3c35
+foreground #fdfff1
+
+cursor #fdfff1
+cursor_text_color #000000
+selection_foreground #3b3c35
+selection_background #fdfff1
+
+# dull black
+color0 #3b3c35
+# light black
+color8 #6e7066
+
+# dull red
+color1 #f82570
+# light red
+color9 #f82570
+
+# dull green
+color2 #a6e12d
+# light green
+color10 #a6e12d
+
+# yellow
+color3 #e4db73
+# light yellow
+color11 #e4db73
+
+# blue
+color4 #fc961f
+# light blue
+color12 #fc961f
+
+# magenta
+color5 #ae81ff
+# light magenta
+color13 #ae81ff
+
+# cyan
+color6 #66d9ee
+# light cyan
+color14 #66d9ee
+
+# dull white
+color7 #fdfff1
+# bright white
+color15 #fdfff1

nvim/init.vim

@@ -0,0 +1,222 @@
+call plug#begin(stdpath('data') . '/plugged')
+" The default plugin directory will be as follows:
+"   - Vim (Linux/macOS): '~/.vim/plugged'
+"   - Vim (Windows): '~/vimfiles/plugged'
+"   - Neovim (Linux/macOS/Windows): stdpath('data') . '/plugged'
+" You can specify a custom plugin directory by passing it as the argument
+"   - e.g. `call plug#begin('~/.vim/plugged')`
+"   - Avoid using standard Vim directory names like 'plugin'
+
+" Make sure you use single quotes
+
+" Shorthand notation; fetches https://github.com/junegunn/vim-easy-align
+Plug 'tpope/vim-sensible'
+Plug 'vim-airline/vim-airline'
+Plug 'vim-airline/vim-airline-themes'
+Plug 'Townk/vim-autoclose'
+Plug 'neoclide/coc.nvim', {'branch': 'release'}
+"let g:airline_powerline_fonts = 1
+
+map j gj
+map k gk
+
+" Initialize plugin system
+call plug#end()
+
+set mouse+=a
+
+let g:airline_them ='base16_atelier_heath_light'
+
+set number
+set wrap
+set linebreak
+
+" use indents of 4 spaces, and have them copied down lines:
+set shiftwidth=2
+set tabstop=2
+set softtabstop=2
+set expandtab
+set smarttab
+set autoindent
+set textwidth=80
+filetype indent off
+
+" enable filetype detection:
+filetype on
+
+autocmd FileType markdown,tex,text set nosmarttab noautoindent
+" for C-like programming, have automatic indentation:
+autocmd FileType c,cpp,slang set cindent
+" * Keystrokes -- Insert Mode
+autocmd Filetype python set shiftwidth=4 tabstop=4 softtabstop=4
+
+"Coc Stuff
+
+set encoding=utf-8
+
+" TextEdit might fail if hidden is not set.
+set hidden
+
+" Some servers have issues with backup files, see #649.
+set nobackup
+set nowritebackup
+
+" Give more space for displaying messages.
+set cmdheight=2
+
+" Having longer updatetime (default is 4000 ms = 4 s) leads to noticeable
+" delays and poor user experience.
+set updatetime=300
+
+" Don't pass messages to |ins-completion-menu|.
+set shortmess+=c
+
+" Always show the signcolumn, otherwise it would shift the text each time
+" diagnostics appear/become resolved.
+if has("nvim-0.5.0") || has("patch-8.1.1564")
+  " Recently vim can merge signcolumn and number column into one
+  set signcolumn=number
+else
+  set signcolumn=yes
+endif
+
+" Use tab for trigger completion with characters ahead and navigate.
+" NOTE: Use command ':verbose imap <tab>' to make sure tab is not mapped by
+" other plugin before putting this into your config.
+inoremap <silent><expr> <TAB>
+      \ pumvisible() ? "\<C-n>" :
+      \ <SID>check_back_space() ? "\<TAB>" :
+      \ coc#refresh()
+inoremap <expr><S-TAB> pumvisible() ? "\<C-p>" : "\<C-h>"
+
+function! s:check_back_space() abort
+  let col = col('.') - 1
+  return !col || getline('.')[col - 1]  =~# '\s'
+endfunction
+
+" Use <c-space> to trigger completion.
+if has('nvim')
+  inoremap <silent><expr> <c-space> coc#refresh()
+else
+  inoremap <silent><expr> <c-@> coc#refresh()
+endif
+
+" Make <CR> auto-select the first completion item and notify coc.nvim to
+" format on enter, <cr> could be remapped by other vim plugin
+inoremap <silent><expr> <cr> pumvisible() ? coc#_select_confirm()
+                              \: "\<C-g>u\<CR>\<c-r>=coc#on_enter()\<CR>"
+
+" Use `[g` and `]g` to navigate diagnostics
+" Use `:CocDiagnostics` to get all diagnostics of current buffer in location list.
+nmap <silent> [g <Plug>(coc-diagnostic-prev)
+nmap <silent> ]g <Plug>(coc-diagnostic-next)
+
+" GoTo code navigation.
+nmap <silent> gd <Plug>(coc-definition)
+nmap <silent> gy <Plug>(coc-type-definition)
+nmap <silent> gi <Plug>(coc-implementation)
+nmap <silent> gr <Plug>(coc-references)
+
+" Use K to show documentation in preview window.
+nnoremap <silent> K :call <SID>show_documentation()<CR>
+
+function! s:show_documentation()
+  if (index(['vim','help'], &filetype) >= 0)
+    execute 'h '.expand('<cword>')
+  elseif (coc#rpc#ready())
+    call CocActionAsync('doHover')
+  else
+    execute '!' . &keywordprg . " " . expand('<cword>')
+  endif
+endfunction
+
+" Highlight the symbol and its references when holding the cursor.
+autocmd CursorHold * silent call CocActionAsync('highlight')
+
+" Symbol renaming.
+nmap <leader>rn <Plug>(coc-rename)
+
+" Formatting selected code.
+xmap <leader>f  <Plug>(coc-format-selected)
+nmap <leader>f  <Plug>(coc-format-selected)
+
+augroup mygroup
+  autocmd!
+  " Setup formatexpr specified filetype(s).
+  autocmd FileType typescript,json setl formatexpr=CocAction('formatSelected')
+  " Update signature help on jump placeholder.
+  autocmd User CocJumpPlaceholder call CocActionAsync('showSignatureHelp')
+augroup end
+
+" Applying codeAction to the selected region.
+" Example: `<leader>aap` for current paragraph
+xmap <leader>a  <Plug>(coc-codeaction-selected)
+nmap <leader>a  <Plug>(coc-codeaction-selected)
+
+" Remap keys for applying codeAction to the current buffer.
+nmap <leader>ac  <Plug>(coc-codeaction)
+" Apply AutoFix to problem on the current line.
+nmap <leader>qf  <Plug>(coc-fix-current)
+
+" Run the Code Lens action on the current line.
+nmap <leader>cl  <Plug>(coc-codelens-action)
+
+" Map function and class text objects
+" NOTE: Requires 'textDocument.documentSymbol' support from the language server.
+xmap if <Plug>(coc-funcobj-i)
+omap if <Plug>(coc-funcobj-i)
+xmap af <Plug>(coc-funcobj-a)
+omap af <Plug>(coc-funcobj-a)
+xmap ic <Plug>(coc-classobj-i)
+omap ic <Plug>(coc-classobj-i)
+xmap ac <Plug>(coc-classobj-a)
+omap ac <Plug>(coc-classobj-a)
+
+" Remap <C-f> and <C-b> for scroll float windows/popups.
+if has('nvim-0.4.0') || has('patch-8.2.0750')
+  nnoremap <silent><nowait><expr> <C-f> coc#float#has_scroll() ? coc#float#scroll(1) : "\<C-f>"
+  nnoremap <silent><nowait><expr> <C-b> coc#float#has_scroll() ? coc#float#scroll(0) : "\<C-b>"
+  inoremap <silent><nowait><expr> <C-f> coc#float#has_scroll() ? "\<c-r>=coc#float#scroll(1)\<cr>" : "\<Right>"
+  inoremap <silent><nowait><expr> <C-b> coc#float#has_scroll() ? "\<c-r>=coc#float#scroll(0)\<cr>" : "\<Left>"
+  vnoremap <silent><nowait><expr> <C-f> coc#float#has_scroll() ? coc#float#scroll(1) : "\<C-f>"
+  vnoremap <silent><nowait><expr> <C-b> coc#float#has_scroll() ? coc#float#scroll(0) : "\<C-b>"
+endif
+
+" Use CTRL-S for selections ranges.
+" Requires 'textDocument/selectionRange' support of language server.
+nmap <silent> <C-s> <Plug>(coc-range-select)
+xmap <silent> <C-s> <Plug>(coc-range-select)
+
+" Add `:Format` command to format current buffer.
+command! -nargs=0 Format :call CocActionAsync('format')
+
+" Add `:Fold` command to fold current buffer.
+command! -nargs=? Fold :call     CocAction('fold', <f-args>)
+
+" Add `:OR` command for organize imports of the current buffer.
+command! -nargs=0 OR   :call     CocActionAsync('runCommand', 'editor.action.organizeImport')
+
+" Add (Neo)Vim's native statusline support.
+" NOTE: Please see `:h coc-status` for integrations with external plugins that
+" provide custom statusline: lightline.vim, vim-airline.
+set statusline^=%{coc#status()}%{get(b:,'coc_current_function','')}
+
+" Mappings for CoCList
+" Show all diagnostics.
+nnoremap <silent><nowait> <space>a  :<C-u>CocList diagnostics<cr>
+" Manage extensions.
+nnoremap <silent><nowait> <space>e  :<C-u>CocList extensions<cr>
+" Show commands.
+nnoremap <silent><nowait> <space>c  :<C-u>CocList commands<cr>
+" Find symbol of current document.
+nnoremap <silent><nowait> <space>o  :<C-u>CocList outline<cr>
+" Search workspace symbols.
+nnoremap <silent><nowait> <space>s  :<C-u>CocList -I symbols<cr>
+" Do default action for next item.
+nnoremap <silent><nowait> <space>j  :<C-u>CocNext<CR>
+" Do default action for previous item.
+nnoremap <silent><nowait> <space>k  :<C-u>CocPrev<CR>
+" Resume latest coc list.
+nnoremap <silent><nowait> <space>p  :<C-u>CocListResume<CR>
+
+" END Coc

polybar/config

@@ -0,0 +1,269 @@
+;==========================================================
+;
+;
+;   ██████╗  ██████╗ ██╗  ██╗   ██╗██████╗  █████╗ ██████╗
+;   ██╔══██╗██╔═══██╗██║  ╚██╗ ██╔╝██╔══██╗██╔══██╗██╔══██╗
+;   ██████╔╝██║   ██║██║   ╚████╔╝ ██████╔╝███████║██████╔╝
+;   ██╔═══╝ ██║   ██║██║    ╚██╔╝  ██╔══██╗██╔══██║██╔══██╗
+;   ██║     ╚██████╔╝███████╗██║   ██████╔╝██║  ██║██║  ██║
+;   ╚═╝      ╚═════╝ ╚══════╝╚═╝   ╚═════╝ ╚═╝  ╚═╝╚═╝  ╚═╝
+;
+;
+;   To learn more about how to configure Polybar
+;   go to https://github.com/polybar/polybar
+;
+;   The README contains a lot of information
+;
+;==========================================================
+
+[colors]
+background = #222
+background-alt = #444
+;foreground = ${xrdb:color7:#222}
+foreground = #dfdfdf
+foreground-alt = #555
+primary = #fba465
+secondary = #3a0751
+
+;primary = #cec0af
+;secondary = #242e35
+
+alert = #bd2c40
+black = #000
+white = #fff
+grey = #aaa
+darkgrey = #555
+red = #f00
+green = #0f0
+blue = #2d02d0
+yellow = #d2b55b
+
+[bar/main]
+modules-center = date
+font-0 = Jetbrains Mono:style=Regular
+height = 30
+width = 320
+offset-x = 15
+
+offset-y = 15
+background = ${colors.primary}
+radius=5
+override-redirect=true
+
+[module/date]
+type = internal/date
+date = "%h-%d-20%y %r"
+label-foreground = #000000
+
+[bar/pulse]
+modules-center = pulseaudio
+height = 30
+width = 200
+offset-y = 15
+#offset-x = 1300
+offset-x = 350
+radius=5
+override-redirect=true
+background = ${colors.secondary}
+foreground = #fff
+font-0 = Jetbrains Mono:style=Regular
+font-1 = FontAwesome:style=Regular
+font-2 = "Iosevka:pixelsize=12;0"
+font-3 = RobotoMono Nerd Font:pixelsize=12;1
+
+;; BEGIN COPY
+
+
+[bar/battery]
+modules-center = battery
+height = 30
+width = 150
+offset-y = 15
+#offset-x = 600
+offset-x = 565
+radius=5
+override-redirect=true
+background = ${colors.secondary}
+font-0 = Jetbrains Mono:style=Regular
+
+[module/battery]
+type = internal/battery
+full-at = 100
+battery = BAT0
+adapter = ADP1
+poll-interval = 5
+
+time-format = %H:%M
+format-charging = CHR <label-charging>
+format-discharging = DIS <label-discharging>
+
+label-charging = %percentage%%
+label-discharging = %percentage%%
+label-full =  100%
+
+[bar/backlight]
+modules-center = backlight
+height = 30
+width = 150
+offset-y = 15
+#offset-x = 1100
+#offset-x = 420
+offset-x = 730
+radius=5
+override-redirect=true
+background = ${colors.secondary}
+font-0 = Jetbrains Mono:style=Regular
+
+[module/backlight]
+
+type = internal/backlight
+card = intel_backlight
+format = BRI <label>
+label = "%percentage%%"
+
+[bar/wlan]
+;background = #1a0936
+modules-center = wlan
+height = 30
+width = 320
+offset-y = 15
+offset-x = 895
+radius=5
+override-redirect=true
+background = ${colors.secondary}
+font-0 = Jetbrains Mono:style=Regular
+tray-position = right
+tray-padding = 5
+
+[module/wlan]
+type = internal/network
+interface = wlp0s20f3
+format-disconnected = <label-disconnected>
+format-connected = <label-connected> <ramp-signal>
+
+;label-connected = "CON %essid% %{F#00F000}%local_ip%"
+label-connected = "%essid%"
+label-disconnected = "UNC"
+
+ramp-signal-0 = 😱
+ramp-signal-1 = 😠
+ramp-signal-2 = 😒
+ramp-signal-3 = 😊
+ramp-signal-4 = 😃
+ramp-signal-5 = 😈
+
+#ramp-signal-0 = _____
+#ramp-signal-1 = *____
+#ramp-signal-2 = **___
+#ramp-signal-3 = ***__
+#ramp-signal-4 = ****_
+#ramp-signal-5 = *****
+
+;; END OF COPY
+
+[module/xworkspaces]
+type = internal/xworkspaces
+
+label-active = %name%
+label-active-background = ${colors.background-alt}
+label-active-underline= ${colors.primary}
+label-active-padding = 1
+
+label-occupied = %name%
+label-occupied-padding = 1
+
+label-urgent = %name%
+label-urgent-background = ${colors.alert}
+label-urgent-padding = 1
+
+label-empty = %name%
+label-empty-foreground = ${colors.disabled}
+label-empty-padding = 1
+
+[module/xwindow]
+type = internal/xwindow
+label = %title:0:60:...%
+
+[module/filesystem]
+type = internal/fs
+interval = 25
+
+mount-0 = /
+
+label-mounted = %{F#F0C674}%mountpoint%%{F-} %percentage_used%%
+
+label-unmounted = %mountpoint% not mounted
+label-unmounted-foreground = ${colors.disabled}
+
+[module/pulseaudio]
+type = internal/pulseaudio
+
+format-volume-prefix = "VOL "
+format-volume-prefix-foreground = ${colors.primary}
+format-volume = <label-volume>
+
+label-volume = %percentage%%
+
+label-muted = muted
+label-muted-foreground = ${colors.disabled}
+
+[module/xkeyboard]
+type = internal/xkeyboard
+blacklist-0 = num lock
+
+label-layout = %layout%
+label-layout-foreground = ${colors.primary}
+
+label-indicator-padding = 2
+label-indicator-margin = 1
+label-indicator-foreground = ${colors.background}
+label-indicator-background = ${colors.secondary}
+
+[module/memory]
+type = internal/memory
+interval = 2
+format-prefix = "RAM "
+format-prefix-foreground = ${colors.primary}
+label = %percentage_used:2%%
+
+[module/cpu]
+type = internal/cpu
+interval = 2
+format-prefix = "CPU "
+format-prefix-foreground = ${colors.primary}
+label = %percentage:2%%
+
+;[network-base]
+;type = internal/network
+;interval = 5
+;format-connected = <label-connected>
+;format-disconnected = <label-disconnected>
+;label-disconnected = %{F#F0C674}%ifname%%{F#707880} disconnected
+;
+;[module/wlan]
+;inherit = network-base
+;interface-type = wireless
+;label-connected = %{F#F0C674}%ifname%%{F-} %essid% %local_ip%
+;
+;[module/eth]
+;inherit = network-base
+;interface-type = wired
+;label-connected = %{F#F0C674}%ifname%%{F-} %local_ip%
+
+#[module/date]
+#type = internal/date
+#interval = 1
+
+#date = %H:%M
+#date-alt = %Y-%m-%d %H:%M:%S
+
+#label = %date%
+#label-foreground = ${colors.primary}
+
+[settings]
+screenchange-reload = true
+pseudo-transparency = true
+
+
+
+; vim:ft=dosini

polybar/launch.sh

@@ -0,0 +1,19 @@
+#!/bin/sh
+
+#!/bin/bash
+
+# Terminate already running bar instances
+pkill polybar
+
+# Wait until the processes have been shut down
+while pgrep -u $UID -x polybar >/dev/null; do sleep 1; done
+
+# Launch Polybar, using default config location ~/.config/polybar/config
+
+polybar main & sleep 0.5
+polybar pulse &
+polybar battery &
+polybar backlight &
+polybar wlan &
+
+echo "Polybar launched..."

ranger/rc.conf

@@ -0,0 +1,3 @@
+set preview_images true
+set preview_images_method ueberzug
+set draw_borders true

ranger/scope.sh

@@ -0,0 +1,350 @@
+#!/usr/bin/env bash
+
+set -o noclobber -o noglob -o nounset -o pipefail
+IFS=$'\n'
+
+## If the option `use_preview_script` is set to `true`,
+## then this script will be called and its output will be displayed in ranger.
+## ANSI color codes are supported.
+## STDIN is disabled, so interactive scripts won't work properly
+
+## This script is considered a configuration file and must be updated manually.
+## It will be left untouched if you upgrade ranger.
+
+## Because of some automated testing we do on the script #'s for comments need
+## to be doubled up. Code that is commented out, because it's an alternative for
+## example, gets only one #.
+
+## Meanings of exit codes:
+## code | meaning    | action of ranger
+## -----+------------+-------------------------------------------
+## 0    | success    | Display stdout as preview
+## 1    | no preview | Display no preview at all
+## 2    | plain text | Display the plain content of the file
+## 3    | fix width  | Don't reload when width changes
+## 4    | fix height | Don't reload when height changes
+## 5    | fix both   | Don't ever reload
+## 6    | image      | Display the image `$IMAGE_CACHE_PATH` points to as an image preview
+## 7    | image      | Display the file directly as an image
+
+## Script arguments
+FILE_PATH="${1}"         # Full path of the highlighted file
+PV_WIDTH="${2}"          # Width of the preview pane (number of fitting characters)
+## shellcheck disable=SC2034 # PV_HEIGHT is provided for convenience and unused
+PV_HEIGHT="${3}"         # Height of the preview pane (number of fitting characters)
+IMAGE_CACHE_PATH="${4}"  # Full path that should be used to cache image preview
+PV_IMAGE_ENABLED="${5}"  # 'True' if image previews are enabled, 'False' otherwise.
+
+FILE_EXTENSION="${FILE_PATH##*.}"
+FILE_EXTENSION_LOWER="$(printf "%s" "${FILE_EXTENSION}" | tr '[:upper:]' '[:lower:]')"
+
+## Settings
+HIGHLIGHT_SIZE_MAX=262143  # 256KiB
+HIGHLIGHT_TABWIDTH=${HIGHLIGHT_TABWIDTH:-8}
+HIGHLIGHT_STYLE=${HIGHLIGHT_STYLE:-pablo}
+HIGHLIGHT_OPTIONS="--replace-tabs=${HIGHLIGHT_TABWIDTH} --style=${HIGHLIGHT_STYLE} ${HIGHLIGHT_OPTIONS:-}"
+PYGMENTIZE_STYLE=${PYGMENTIZE_STYLE:-autumn}
+OPENSCAD_IMGSIZE=${RNGR_OPENSCAD_IMGSIZE:-1000,1000}
+OPENSCAD_COLORSCHEME=${RNGR_OPENSCAD_COLORSCHEME:-Tomorrow Night}
+
+handle_extension() {
+    case "${FILE_EXTENSION_LOWER}" in
+        ## Archive
+        a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
+        rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
+            atool --list -- "${FILE_PATH}" && exit 5
+            bsdtar --list --file "${FILE_PATH}" && exit 5
+            exit 1;;
+        rar)
+            ## Avoid password prompt by providing empty password
+            unrar lt -p- -- "${FILE_PATH}" && exit 5
+            exit 1;;
+        7z)
+            ## Avoid password prompt by providing empty password
+            7z l -p -- "${FILE_PATH}" && exit 5
+            exit 1;;
+
+        ## PDF
+        pdf)
+            ## Preview as text conversion
+            pdftotext -l 10 -nopgbrk -q -- "${FILE_PATH}" - | \
+              fmt -w "${PV_WIDTH}" && exit 5
+            mutool draw -F txt -i -- "${FILE_PATH}" 1-10 | \
+              fmt -w "${PV_WIDTH}" && exit 5
+            exiftool "${FILE_PATH}" && exit 5
+            exit 1;;
+
+        ## BitTorrent
+        torrent)
+            transmission-show -- "${FILE_PATH}" && exit 5
+            exit 1;;
+
+        ## OpenDocument
+        odt|ods|odp|sxw)
+            ## Preview as text conversion
+            odt2txt "${FILE_PATH}" && exit 5
+            ## Preview as markdown conversion
+            pandoc -s -t markdown -- "${FILE_PATH}" && exit 5
+            exit 1;;
+
+        ## XLSX
+        xlsx)
+            ## Preview as csv conversion
+            ## Uses: https://github.com/dilshod/xlsx2csv
+            xlsx2csv -- "${FILE_PATH}" && exit 5
+            exit 1;;
+
+        ## HTML
+        htm|html|xhtml)
+            ## Preview as text conversion
+            w3m -dump "${FILE_PATH}" && exit 5
+            lynx -dump -- "${FILE_PATH}" && exit 5
+            elinks -dump "${FILE_PATH}" && exit 5
+            pandoc -s -t markdown -- "${FILE_PATH}" && exit 5
+            ;;
+
+        ## JSON
+        json)
+            jq --color-output . "${FILE_PATH}" && exit 5
+            python -m json.tool -- "${FILE_PATH}" && exit 5
+            ;;
+
+        ## Direct Stream Digital/Transfer (DSDIFF) and wavpack aren't detected
+        ## by file(1).
+        dff|dsf|wv|wvc)
+            mediainfo "${FILE_PATH}" && exit 5
+            exiftool "${FILE_PATH}" && exit 5
+            ;; # Continue with next handler on failure
+    esac
+}
+
+handle_image() {
+    ## Size of the preview if there are multiple options or it has to be
+    ## rendered from vector graphics. If the conversion program allows
+    ## specifying only one dimension while keeping the aspect ratio, the width
+    ## will be used.
+    local DEFAULT_SIZE="1920x1080"
+
+    local mimetype="${1}"
+    case "${mimetype}" in
+        ## SVG
+        # image/svg+xml|image/svg)
+        #     convert -- "${FILE_PATH}" "${IMAGE_CACHE_PATH}" && exit 6
+        #     exit 1;;
+
+        ## DjVu
+        # image/vnd.djvu)
+        #     ddjvu -format=tiff -quality=90 -page=1 -size="${DEFAULT_SIZE}" \
+        #           - "${IMAGE_CACHE_PATH}" < "${FILE_PATH}" \
+        #           && exit 6 || exit 1;;
+
+        ## Image
+        image/*)
+            local orientation
+            orientation="$( identify -format '%[EXIF:Orientation]\n' -- "${FILE_PATH}" )"
+            ## If orientation data is present and the image actually
+            ## needs rotating ("1" means no rotation)...
+            if [[ -n "$orientation" && "$orientation" != 1 ]]; then
+                ## ...auto-rotate the image according to the EXIF data.
+                convert -- "${FILE_PATH}" -auto-orient "${IMAGE_CACHE_PATH}" && exit 6
+            fi
+
+            ## `w3mimgdisplay` will be called for all images (unless overriden
+            ## as above), but might fail for unsupported types.
+            exit 7;;
+
+        ## Video
+        # video/*)
+        #     # Thumbnail
+        #     ffmpegthumbnailer -i "${FILE_PATH}" -o "${IMAGE_CACHE_PATH}" -s 0 && exit 6
+        #     exit 1;;
+
+        ## PDF
+        application/pdf)
+            pdftoppm -f 1 -l 1 \
+                     -scale-to-x "${DEFAULT_SIZE%x*}" \
+                     -scale-to-y -1 \
+                     -singlefile \
+                     -jpeg -tiffcompression jpeg \
+                     -- "${FILE_PATH}" "${IMAGE_CACHE_PATH%.*}" \
+                && exit 6 || exit 1;;
+
+
+        ## ePub, MOBI, FB2 (using Calibre)
+        # application/epub+zip|application/x-mobipocket-ebook|\
+        # application/x-fictionbook+xml)
+        #     # ePub (using https://github.com/marianosimone/epub-thumbnailer)
+        #     epub-thumbnailer "${FILE_PATH}" "${IMAGE_CACHE_PATH}" \
+        #         "${DEFAULT_SIZE%x*}" && exit 6
+        #     ebook-meta --get-cover="${IMAGE_CACHE_PATH}" -- "${FILE_PATH}" \
+        #         >/dev/null && exit 6
+        #     exit 1;;
+
+        ## Font
+        application/font*|application/*opentype)
+            preview_png="/tmp/$(basename "${IMAGE_CACHE_PATH%.*}").png"
+            if fontimage -o "${preview_png}" \
+                         --pixelsize "120" \
+                         --fontname \
+                         --pixelsize "80" \
+                         --text "  ABCDEFGHIJKLMNOPQRSTUVWXYZ  " \
+                         --text "  abcdefghijklmnopqrstuvwxyz  " \
+                         --text "  0123456789.:,;(*!?') ff fl fi ffi ffl  " \
+                         --text "  The quick brown fox jumps over the lazy dog.  " \
+                         "${FILE_PATH}";
+            then
+                convert -- "${preview_png}" "${IMAGE_CACHE_PATH}" \
+                    && rm "${preview_png}" \
+                    && exit 6
+            else
+                exit 1
+            fi
+            ;;
+
+        ## Preview archives using the first image inside.
+        ## (Very useful for comic book collections for example.)
+        # application/zip|application/x-rar|application/x-7z-compressed|\
+        #     application/x-xz|application/x-bzip2|application/x-gzip|application/x-tar)
+        #     local fn=""; local fe=""
+        #     local zip=""; local rar=""; local tar=""; local bsd=""
+        #     case "${mimetype}" in
+        #         application/zip) zip=1 ;;
+        #         application/x-rar) rar=1 ;;
+        #         application/x-7z-compressed) ;;
+        #         *) tar=1 ;;
+        #     esac
+        #     { [ "$tar" ] && fn=$(tar --list --file "${FILE_PATH}"); } || \
+        #     { fn=$(bsdtar --list --file "${FILE_PATH}") && bsd=1 && tar=""; } || \
+        #     { [ "$rar" ] && fn=$(unrar lb -p- -- "${FILE_PATH}"); } || \
+        #     { [ "$zip" ] && fn=$(zipinfo -1 -- "${FILE_PATH}"); } || return
+        #
+        #     fn=$(echo "$fn" | python -c "import sys; import mimetypes as m; \
+        #             [ print(l, end='') for l in sys.stdin if \
+        #               (m.guess_type(l[:-1])[0] or '').startswith('image/') ]" |\
+        #         sort -V | head -n 1)
+        #     [ "$fn" = "" ] && return
+        #     [ "$bsd" ] && fn=$(printf '%b' "$fn")
+        #
+        #     [ "$tar" ] && tar --extract --to-stdout \
+        #         --file "${FILE_PATH}" -- "$fn" > "${IMAGE_CACHE_PATH}" && exit 6
+        #     fe=$(echo -n "$fn" | sed 's/[][*?\]/\\\0/g')
+        #     [ "$bsd" ] && bsdtar --extract --to-stdout \
+        #         --file "${FILE_PATH}" -- "$fe" > "${IMAGE_CACHE_PATH}" && exit 6
+        #     [ "$bsd" ] || [ "$tar" ] && rm -- "${IMAGE_CACHE_PATH}"
+        #     [ "$rar" ] && unrar p -p- -inul -- "${FILE_PATH}" "$fn" > \
+        #         "${IMAGE_CACHE_PATH}" && exit 6
+        #     [ "$zip" ] && unzip -pP "" -- "${FILE_PATH}" "$fe" > \
+        #         "${IMAGE_CACHE_PATH}" && exit 6
+        #     [ "$rar" ] || [ "$zip" ] && rm -- "${IMAGE_CACHE_PATH}"
+        #     ;;
+    esac
+
+    # openscad_image() {
+    #     TMPPNG="$(mktemp -t XXXXXX.png)"
+    #     openscad --colorscheme="${OPENSCAD_COLORSCHEME}" \
+    #         --imgsize="${OPENSCAD_IMGSIZE/x/,}" \
+    #         -o "${TMPPNG}" "${1}"
+    #     mv "${TMPPNG}" "${IMAGE_CACHE_PATH}"
+    # }
+
+    # case "${FILE_EXTENSION_LOWER}" in
+    #     ## 3D models
+    #     ## OpenSCAD only supports png image output, and ${IMAGE_CACHE_PATH}
+    #     ## is hardcoded as jpeg. So we make a tempfile.png and just
+    #     ## move/rename it to jpg. This works because image libraries are
+    #     ## smart enough to handle it.
+    #     csg|scad)
+    #         openscad_image "${FILE_PATH}" && exit 6
+    #         ;;
+    #     3mf|amf|dxf|off|stl)
+    #         openscad_image <(echo "import(\"${FILE_PATH}\");") && exit 6
+    #         ;;
+    # esac
+}
+
+handle_mime() {
+    local mimetype="${1}"
+    case "${mimetype}" in
+        ## RTF and DOC
+        text/rtf|*msword)
+            ## Preview as text conversion
+            ## note: catdoc does not always work for .doc files
+            ## catdoc: http://www.wagner.pp.ru/~vitus/software/catdoc/
+            catdoc -- "${FILE_PATH}" && exit 5
+            exit 1;;
+
+        ## DOCX, ePub, FB2 (using markdown)
+        ## You might want to remove "|epub" and/or "|fb2" below if you have
+        ## uncommented other methods to preview those formats
+        *wordprocessingml.document|*/epub+zip|*/x-fictionbook+xml)
+            ## Preview as markdown conversion
+            pandoc -s -t markdown -- "${FILE_PATH}" && exit 5
+            exit 1;;
+
+        ## XLS
+        *ms-excel)
+            ## Preview as csv conversion
+            ## xls2csv comes with catdoc:
+            ##   http://www.wagner.pp.ru/~vitus/software/catdoc/
+            xls2csv -- "${FILE_PATH}" && exit 5
+            exit 1;;
+
+        ## Text
+        text/* | */xml)
+            ## Syntax highlight
+            if [[ "$( stat --printf='%s' -- "${FILE_PATH}" )" -gt "${HIGHLIGHT_SIZE_MAX}" ]]; then
+                exit 2
+            fi
+            if [[ "$( tput colors )" -ge 256 ]]; then
+                local pygmentize_format='terminal256'
+                local highlight_format='xterm256'
+            else
+                local pygmentize_format='terminal'
+                local highlight_format='ansi'
+            fi
+            env HIGHLIGHT_OPTIONS="${HIGHLIGHT_OPTIONS}" highlight \
+                --out-format="${highlight_format}" \
+                --force -- "${FILE_PATH}" && exit 5
+            env COLORTERM=8bit bat --color=always --style="plain" \
+                -- "${FILE_PATH}" && exit 5
+            pygmentize -f "${pygmentize_format}" -O "style=${PYGMENTIZE_STYLE}"\
+                -- "${FILE_PATH}" && exit 5
+            exit 2;;
+
+        ## DjVu
+        image/vnd.djvu)
+            ## Preview as text conversion (requires djvulibre)
+            djvutxt "${FILE_PATH}" | fmt -w "${PV_WIDTH}" && exit 5
+            exiftool "${FILE_PATH}" && exit 5
+            exit 1;;
+
+        ## Image
+        image/*)
+            ## Preview as text conversion
+            # img2txt --gamma=0.6 --width="${PV_WIDTH}" -- "${FILE_PATH}" && exit 4
+            exiftool "${FILE_PATH}" && exit 5
+            exit 1;;
+
+        ## Video and audio
+        video/* | audio/*)
+            mediainfo "${FILE_PATH}" && exit 5
+            exiftool "${FILE_PATH}" && exit 5
+            exit 1;;
+    esac
+}
+
+handle_fallback() {
+    echo '----- File Type Classification -----' && file --dereference --brief -- "${FILE_PATH}" && exit 5
+    exit 1
+}
+
+
+MIMETYPE="$( file --dereference --brief --mime-type -- "${FILE_PATH}" )"
+if [[ "${PV_IMAGE_ENABLED}" == 'True' ]]; then
+    handle_image "${MIMETYPE}"
+fi
+handle_extension
+handle_mime "${MIMETYPE}"
+handle_fallback
+
+exit 1